Wall Mount Pen Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted a wall-mounted pen holder, to hang next to my colour-in poster of Berlin! This is designed to fit pens with a…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 270
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
I wanted a wall-mounted pen holder, to hang next to my colour-in poster of Berlin!
This is designed to fit pens with a diameter of 10mm, and will hold 16 pens.
There's a 0.1mm clearance between the support strut and the top grid - you can scale up the base if you need a tighter clearance.
Not strictly a remix of the Cubistand http://www.thingiverse.com/thing:1294085 as it was designed from scratch, but definitely borrowed heavily from the concept.
Print Settings
Printer:
Voron Triden 250
Rafts:
No
Supports:
No
Resolution:
0.3 or lower
Infill:
25%
Notes:
Printed in Das Filament's PETG at 120mm/s, took a little over an hour as it slowed substantially for the spine feature.
Category: Containers