Rain Collector Insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a drop in fix for jtronics 75mm "regensammler" (rain collector)
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 58
- Wydruki
- 1
- Wyświetlenia
- 1179
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
New debris diverter for the 75mm Regensammler (Rain Collector)
I printed and used jtronics rain collector last summer.
https://www.thingiverse.com/thing:4596000
It worked pretty well but when opening it up after the season I found multiple debris diverting arms broken.
This is a printed insert that aims to drop in place and “fix” the broken arms. It is easy to print makes the rain collector serviceable. The aim is for the down pipe to sit just outside the lip so water running down the sides gets collected.
It should scale to the bigger sizes, but I have not tried it. Going smaller might make the walls too thin.
Enjoy