Cordless screwdriver locking & fine adjustment (Here Festool PDC)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I spend some time looking for this solution :) For a long time I used a device made out of rubber and aluminium to…
- Ocena
- 0 / 5
- Polubienia
- 47
- Pobrania
- 114
- Wydruki
- 0
- Wyświetlenia
- 781
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I spend some time looking for this solution :)
For a long time I used a device made out of rubber and aluminium to solve this issue (Using a cordless drill in a stand)
Now that I have a 3D printer it is time to replace the 2 part Solution I used before.
This tool should work for a lot of your screwdrivers not only my Festool one. If not please write me and tell the Issue with my design. So i can fix it!
Have fun and keep printin!
For assembling you need 1 M3 Washer 2 M3 & 1 M3 Nylon nuts and 1 M3 screw ( about 20mm). Fix the Knob by screwing one nut and the Screw together very tight. Maybe use some locktite.
Quickstop very easy possible just by snapping the tab!
Print instructions
Category: Machine Tools Summary
I spend some time looking for this solution :)
For a long time I used a device made out of rubber and aluminium to solve this issue (Using a cordless drill in a stand)
Now that I have a 3D printer it is time to replace the 2 part Solution I used before.
This tool should work for a lot of your screwdrivers not only my Festool one. If not please write me and tell the Issue with my design. So i can fix it!
Have fun and keep printin!
For assembling you need 1 M3 Washer 2 M3 & 1 M3 Nylon nuts and 1 M3 screw ( about 20mm). Fix the Knob by screwing one nut and the Screw together very tight. Maybe use some locktite.
Quickstop very easy possible just by snapping the tab!
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
</div>Rafts:No
Supports:
No
</div>Resolution:0.2
Infill:
100
</div>Filament:
Prusament PETG Chalky blue
Notes:
Easy print :)