E-Torx Shallow Socket Tray E4-E24
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Socket tray for full set of E-Torx Shallow Sockets from snap-on, P/N: 213AFLEY, plus a 3/8 drive E10 socket P/N: FLE100A
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 175
- Wydruki
- 0
- Wyświetlenia
- 966
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
This was made specifically for snap on set P/N: 213AFLEY which has E4-E10 E-Torx Sockets in ¼" drive, E11- E14 E-Torx Sockets in 3/8" drive, and E16-24 E-Torx Sockets in ½" drive.
It also has an extra spot for a 3/8" drive E10 E-Torx Socket P/N: FLE100A as I find that useful to have for bigger bolts than the ¼" drive E10. Other brand sockets may or may not fit, YMMV.
Images are of it printed in Novamaker PLA+ green, Black text is Generic PLA. All stock generic filament settings on BL X1C, see below for print setting changes.
The base model does not come with text, as working with text in fusion is beyond infuriating to me as a beginner. I find it much easier to add after the fact in orca slicer, so the .3mf file does have it added, at a 1mm text height. If you do it yourself, just need to mess with text compression and spaces between text. I did each of the drive sizes in it's own line.
Modifiers for print:
-Changed bottom thickness to 2mm and top layer thickness to 1mm for some extra beef.
-No Brim or supports Needed.