Triple Square Stubby Socket Driver Tray 4mm-18mm 3/8" Drive
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Socket tray for full set of 3/8" drive Triple Square Stubby Socket Drivers from Blue Point, P/N: BLPXZNM389
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 246
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
This was made specifically for blue point set P/N: BLPXZNM389 which is all 4, 5, 6, 8, 10, 12, 14, 16, 18mm Triple square stubby drivers in 3/8" drive. Other brand sockets may or may not fit, YMMV.
Images are of it printed in Novamaker PLA+ green, Black text is Generic PLA. All stock generic filament settings on BL X1C, see below for print setting changes.
The base model does not come with text, as working with text in fusion is beyond infuriating to me as a beginner. I find it much easier to add after the fact in orca slicer, so the .3mf file does have it added, at a 1mm text height. If you do it yourself, just need to mess with text compression and spaces between text.
Modifiers for print:
-Changed bottom thickness to 2mm and top layer thickness to 1mm for some extra beef.
-No Brim or supports Needed.