Toyota MR2 Roadster Spyder Spare Wheel Clamp Cap and Locking Wheel Nut and Stud Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement printed cap for Toyota MR2 Roadster using the original bolt. Optional holder for locking wheel nut & studs.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 732
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Replacement 3d printed cap for a Toyota MR2 Roadster/Spyder, using the original bolt.
The spare wheel clamp on my Spyder had rusted in place, and I needed to split the original Toyota cap (with a chisel) to get access to the bolt head to try and remove it from the car. Instead of buying a used cap and screw to replace it, I've printed a replacement to see whether that would work.
Use the original bolt (after cleaning up the threads if necessary) through the hole in the wheel, then glue the button in place over the head. I did a colour change at 8.30 so it highlights the MR2 logo.
The optional locking wheel nut and stud holder just keeps everything in one place, and makes sure I can find the locking wheel nut when I need it.
Printed in PETG with 10% infill and no supports needed.