Material Roll Clips for Cricut or Silhouette
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A clip for keeping material rolls managed for cutting machines.
- Ocena
- 3,5 / 5
- Polubienia
- 117
- Pobrania
- 424
- Wydruki
- 3
- Wyświetlenia
- 1264
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple clip for holding material rolls that I designed for my wife to use with her Cricut materials. I'm assuming the size is standard for other manufacturers as the Siser rolls also fit well with this.
Print with a 0.4 Nozzle at 0.20mm layer heights.
PETG plastic is needed to keep part strength under flex.
Place seams somewhere on outside of the clip
A brim is designed into the part, so none should be necessary. All brim tabs are on the outside of the clip to keep the material from being scratched.
I've included the project file if there needs to be any modifications for your own use.