1 / 4

Scraper & Double Sided Razor Blade

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Shawn

@Shawn

Needed a safe gasket scrapper, after buying a Permatex set I thought their handle was a little long and uncomfortable.

Ocena: 4,875 / 5
Polubienia: 63
Pobrania: 558
Wydruki: 11
Wyświetlenia: 3068
Oceny: 8

Aktualizacja u źródła: 26 gru 2021

Informacje o modelu

Źródło: Printables
Kategoria: Tools
Licencja: Creative Commons — Attribution — Noncommercial — Share Alike

Szczegóły Pliki (4)Wydruki i komentarze (Wydruki: 11) (Komentarze: 13)Remiksy (3)Kolekcje (111)

Needed a safe gasket scrapper, after buying a Permatex set I thought their handle was a little long and uncomfortable.

**A few have been printing the handle to use with other blades requiring scaling of the handle. I used this Permatex blade as a template, measuring 39.25mm

https://www.amazon.com/Permatex-80190-SaferScraper-Refillable-Blades/dp/B005DVHV0S/ref=asc_df_B005DVHV0S/?tag=hyprod-20&linkCode=df0&hvadid=312192374842&hvpos=&hvnetw=g&hvrand=9592057599481319256&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9031142&hvtargid=pla-493520626005&psc=1

Print instructions

I haven't found the best way to print the handle, typically I have just been printing with the back of the handle down and supports for the front.

The blades hold up pretty well, if you have a stubborn print they may deform a little which then you just switch it around. For $.01 a piece I would just print a sheet of them.

I have only been printing in PETG as PLA is too much of a pain for me.