X-Carve / Carvey CNC Hold Down Knob Clamp Handles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clamp Handles for X-Carve / Carvey CNC.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 307
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- GNU General Public License v2.0
Clamp Handles for X-Carve / Carvey CNC.
The M5 Socket Head variation is much better and the clamp will “hold” the bolt much better after superglueing. The flat head M5 screw version is only to be used as a last result as the handle struggles to grasp the flat smooth surface of the screw.
There's a tall and short version so you can use same length screw for different height boards (the bolts only screw in ½ in)
I used “M5 Socket Head Bolt” for cutting wood up to 1.75 inch thick; My bolts had 8.30 mm heads, I can easily modify the print if the hole isn't large enough for others.