Nova 12" Cole Jaws Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount bracket for Nova Cole Jaws.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 288
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I needed a way to mount my new Nova 12" Cole Jaws (Part Number 6040), as they are too big to go in my workshop drawers. So I designed this bracket so that I could mount them on my workshop wall.
This bracket should also be able to support the Nova 10" Cole Jaws (JSCOLE) as well as Nova's smallest version, the 8" Mini Cole Jaws (6006), assuming they are no thicker than the 12" version (unlikely). However, I haven't tried these as I don't own them. The bracket will probably work with other manufacturers too, like Robert Sorby etc.
The screw holes are 4mm in diameter and countersunk.
Printing Instructions
- Print as orientated (lying on its back)
- Supports not required
- 0.2 layer height
- 20% Infill - you could use less.
- Any filament type - I used Orange Esun PLA+