1 / 4
Sleeve for Fiberlogy New Filament Spool - Compatible with Bambu Lab Filament Spool Switcher & Winder — zdjęcie 1
1 / 4

Sleeve for Fiberlogy New Filament Spool - Compatible with Bambu Lab Filament Spool Switcher & Winder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Sleeve for Fiberlogy New Filament Spool - Compatible with Bambu Lab Filament Spool Switcher & Winder

Ocena
0 / 5
Polubienia
87
Pobrania
327
Wydruki
0
Wyświetlenia
4705
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is “Sleeve for Fiberlogy New Filament Spool” for an amazing project "Filament Spool Switcher & Winder".  Design by @MiklosKiszely_486882

I consume a lot of Fiberlogy filaments. So I'm left with a lot of empty spools. The new versions of the spools have a removable cardboard center. They can be used to rewind filament for incompatible spools for AMS System. That's why I designed an extended version of the “Sleeve for Fiberlogy New Filament Spools” replacing the cardboard version to fit the “Filament Spool Switcher and Winder”.  The original spool is not compatible for Spool Winder. The sleeve has dimensions - External x Internal x Height: 100.2 x 95.2 x 56 mm. It has holes to hook the beginning of the filament.


When you complete the project, please share a photo and a comment. Thank you and have a nice day.


IMPORTANT - READ:
Note that each printer is calibrated differently, has individual user settings, and each uses different types and manufacturers of filaments. Print the “Fibarlogy New Spool - Sleeve - Test.stl” test file to check the correct dimensions. I also noticed that the center of some spools are different in size. Also pay attention to this and take measurements.

 

How to print ? :

  • Material : Use as intended. If you will be drying the filament, use the appropriate material for the sleeve. Otherwise, you can print with PLA.
  • Layer Height : 0.2mm
  • Infill : 100%
  • Wall Loops : 4
  • Bottom Layers : 4
  • Top Layers : 4
  • Support : No
  • Brim : No