Flashforge/Voxelab Filament Holder Extender
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows 2 filament spools to be kept on the printer simultaneously, by extending the original spool holder
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 742
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Allows 2 filament spools to be kept on the printer simultaneously, by extending the original spool holder supplied with some Flashforge/Voxelab printers.
Specifically designed for the Voxelab Aries, but should fit others, provided they come with the same original filament holder.
Has an extra part that acts as a guide for the filament from the outermost spool, so that it doesn't unspool or get stuck between the spools. Can be clipped and off to remove the innermost spool.
Fits spools with up to 79 mm wide hubs and an inner diameter of at least 40 mm.
Prints well at 0.3 mm layer height or smaller. I recommend to prioritise wall thickness over infill, a number of 1.2 mm walls and 10% 3D infill should suffice. PLA seems strong enough. Support is needed. The 3mf files are oriented in the best printing direction, to minimise support and maximise strength.