Ender 3 (or generic 40mm extrusion) Z braces/supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ladies, Fellas, Those that know better: you ever want a bit more stiffness? just enough clearance for a glass bed and…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 348
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Ladies, Fellas, Those that know better: you ever want a bit more stiffness?
just enough clearance for a glass bed and for a covered control/screen pcb.
will interfere with zstop, so unless you're using BL Touch you'll need to readjust the file in openSCAD or only use a brace on the right side.
designed for use with the following t-nut design https://www.thingiverse.com/thing:2881180
includes modified openSCAD file used to output this STL
each brace will need:
8x m4 nut
8x m4 t-nut print (if you just have real m4 tnuts laying around i'd just use those instead)
8x m4x10mm screws
(holy cow i need to dust the undercarriage a bit)
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
.16
Infill:
75
Filament: eSun PLA+ black
Notes:
printed with 8 walls/floors/tops, as the original creator noted that rigidity comes from those moreso than infill. align the longest side of the brace with the print bed.
used the same profile for printing the t-nut parts.Category: 3D Printer Parts