Kreg Foreman to 36mm Festool Vacuum Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this out of necessity when an adapter I ordered online never arrived. Simple remove the vacuum port that comes…
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 137
- Wydruki
- 1
- Wyświetlenia
- 832
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I made this out of necessity when an adapter I ordered online never arrived. Simple remove the vacuum port that comes with the Kreg Foreman and replace it with the two-piece version included here. You can also re-use the two fasteners that came with the machine.
I printed this in PETG on a Prusa i3 Mk3S and it's worked well for connecting my Festool 36mm vacuum hose. Since it is a two-piece assembly it is in essence modular. Different external adapters can be printed to fit any diameter or type of vacuum hose.
Update 5/16/23: Imported from my Thingiverse account to share with a wider audience
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2mm
Infill:
25%
Filament: Matterhackers PETG Red
Notes:
Due to the piloting boss features you'll need to print with supports, but only between the flange and the bed. I used 4 vertical shells for strength. You can post-process by smoothing/sanding if you desire but the adapter worked fine for me with no post-processing.
Category: Machine Tools