Ender 3 Pro Belt Tensioners
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This was designed for the Ender 3 Pro and inspired by similar models out there
- Ocena
- 5 / 5
- Polubienia
- 47
- Pobrania
- 262
- Wydruki
- 1
- Wyświetlenia
- 1620
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This was designed for the Ender 3 Pro and inspired by similar models out there, but as an engineer, I couldn't just reuse someone else's and had to make my own.
I had originally designed the adjustments to be done using a separate key to keep the size down during normal times, but after using it, I have found I can turn the knobs with any additional leverage that the key provides.
The Y-axis tensioner will not work with a normal Ender 3, as the Pro uses a different sized extrusion for the Y-axis. It will reuse the stock hardware for and Ender 3 Pro.
The X-axis tensioner should work on both Ender 3 Pro and Ender 3, although I have not tested this on an Ender 3, so use at your own risk.
I did need to buy a m8 bolt and nut to use with the X-axis tensioner on my Ender 3 Pro, but I believe for the Ender 3 you can reuse the stock hardware
All of my designs are unpaid passion projects that I choose to share, and I provide mesh models for free, but if you'd like to support me and my work, donations are greatly appreciated.
Print Settings
Resolution:
0.2mm
Infill:
50% or greater
Category: 3D Printer Parts