15mm Medieval Towers + Connectors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
15mm Towers - 2 Styles + Connectors - Made for wargaming with 15mm miniatures. Can be used with other 15mm pieces.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 298
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props & Terrains
- Licencja
- Creative Commons — Attribution — Noncommercial
15mm Medieval Tower with 2 Styles - Style A measures 72mm in length X 97mm in height and 72mm depth. Style B measures 72mm in length X 97mm in height and 85mm depth.
For best results for both towers I would reccommend printing stood up so that the top face has a good surface finish and all support will be underneath the tower/crenellations - will require support for inside of the tower as well as crenellations that overhang.
I have 2 versions of this, Style A which is a standard cylindrical tower and Style B which is a cylindrical tower that squares off resulting in a “D” shape.
I've also included 2 connector pieces allowing the towers to connect seamlessly to any other walls. (Recommend printing these stood up with support for the overhang).
These Towers can be used with all other 15mm terrain I've made which are listed below:
15mm Medieval Straight Wall - (https://www.printables.com/model/483127-15mm-medieval-straight-wall)
15mm Medieval 90 Degree Walls - 2 Styles - (https://www.printables.com/model/483148-15mm-medieval-90-degree-walls)