Kobra Go PSU (Chengliang P400W24V) Hex Cover for Noctua 6025
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Chengliang P400W24V PSU cover remix that allows for Noctua 6025 to fit, given enough clearance. Requires buck converter.
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 45
- Wydruki
- 1
- Wyświetlenia
- 514
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I made an extremely unnecessary upgrade to my Kobra Go PSU to make it quieter at idle and fit a noctua 6025. I'm a Noctua fanboy, and this fan at 12V gives almost the same CFH as the stinky one that was in there already. I just cut the hole larger, and made the hex cuts.
I used a separate piece for the fan holder for easier printing. This fits on my Kobra Go when using these longer feet that I remixed: https://www.printables.com/model/483186-longer-kobra-neogo-risers-15mm
Fan mounts into lid with m3 bolts/nuts (m4 should work too, the hole is 5mm). Lid mounts onto cover with m3 bolts. Super glue would also work.
This fits on my Chengliang P400W24V, but it should also fit on the P360W24V. It needs a LM2596 buck converter to step down the 24 to 12V.
It's much quieter at idle, but not completely silent.
Printed in Inland PLA+, the cap is in White and the base is actually Luminous Blue, simply because it was all I had at the time, lol. Will be cool if i ever shine a bright flashlight on it, though…
F3d files are not the prettiest… apologies.