REMIX: Triangle Corner Clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This remix was designed around optimizing the design for use and for printing.
- Ocena
- 0 / 5
- Polubienia
- 37
- Pobrania
- 127
- Wydruki
- 0
- Wyświetlenia
- 926
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This remix was designed around positioning the holes more optimally for a 0.6mm nozzle with 2 perimeter walls, plus chamfering the corner where the pieces you'd be holding together meet to allow for glue squeeze out - this necessitated removing what I felt was an unused hole in the corner. I also removed many fillets and made the bottom of the objects completely flat for easier printing (rather than needing to mess with supports).
As the original designer mentioned, the L bolts will need to be made out 4-½" x ¼"-20 machine bolts with the the threads down with a die. The length of these bolts can be adjusted to suit your needs.