1 / 8
Calcium Reactor Effluent CO2 Off-gassing (outgassing?) Chamber — zdjęcie 1
1 / 8

Calcium Reactor Effluent CO2 Off-gassing (outgassing?) Chamber

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A vessel to off-gas the excess carbon dioxide in your reef tank calcium reactor effluent

Ocena
0 / 5
Polubienia
5
Pobrania
57
Wydruki
0
Wyświetlenia
508
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Does your calcium reactor cause lower pH in your reef tank? Yeah? Well, consider this little chamber designed to hang on vertical sump walls. Run your reactor effluent tube to the bottom along with an airstone. Let the bubbles drive off the excess carbon dioxide before it lowers your reef tank's pH. Limewood airstone is recommended to get the finest bubbles.

This is designed specifically for a RedSea 425XL sump. Mine is upstream of a refugium, skimmer, and return pump compartments. Hanger should work for up to 7mm glass. Scale vertically to easily increase the volume if your space permits.

Print upright, supports required

PETG, 2 walls, 3 layers, 100% infill

F3d file included for your tinkering.

The FishOfHex Aquatics YouTube channel inspired this model. 

Edit: While this chamber seems a little small for my sump and 135 total gallons of reef tank, I was pleased to see an immediate jump in system pH on day 1 of installation. Have a look at the chart and judge for yourself. I much prefer this to CO2 scrubbing media as there are no consumables. $14 for an air pump and limewood air stone and the print is all you need.

Tagi