Backlit/Transparent Power Button
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A strong button with transparent shaft that can provide light to the "POWER" text on the face of the button.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 339
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My racing simulator rig uses a Fanatec racing wheel and a metal dashboard for additional buttons. The dash metal plate unfortunately covered the backlit power button on the racing wheel, so I drilled out the dash so I could push the button through the whole. Rather than use a pen or other device to fit through the hole, I designed my own backlit power button.
The first few layers were printed in Red PLA as the face of the button, where the remainder of the layers were printed in transparent PETG. There is a color change programmed into the gcode file to swap material.
Very strong, provides nice lighting effect, and no supports needed!
Enjoy! :-)