Low Poly Pokémon Chess Set
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A sturdy (weighted) Pokémon chess set that ressembles a traditional one as close as possible (at least in my eyes ;).
- Ocena
- 5 / 5
- Polubienia
- 533
- Pobrania
- 1533
- Wydruki
- 8
- Wyświetlenia
- 13 236
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a sturdy Pokemon chess set (birthday present for 8 year olds) that ressembles a traditional one as close as possible.
I uploaded two versions:
- All files that start with an underscore "_" contain each figure as a whole.
- All files starting with "NUTs_M5" contain figures and base parts that hold standard M5 nuts and should be used if you wanted to produce weighted pieces that do not fall over as easily. I printed the bases at 50% infill and the podest/figures with 15% infill.
If your printer is not as perfectly dialed in like my Prusa :), you could either to scale the pieces 2-dimensionally in X and Y or adjust the XY Compensation Settings in Prusa Slic3er for a snug fit of the nuts....
The knight (Mudkip) is the only piece that needs supports enabled.
Print Settings
Supports:
No (except on the knight/Mudkip)
Resolution:
0.2
Infill:
15% (figures) and 50% (base)
Notes:
All files except the knight/mudkip print without supports.
Post-Printing:
For a weighted chess set 2 x M5 nuts can be added into the cavities and then the base and figures can be glued (for PLA standard white wood glue works perfectly)