MINIgolf Stick / Putter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For an "indoor apartment Mini-Golf Tournament" we are having, I built some Mini-Golf-Putters!
- Ocena
- 4,5 / 5
- Polubienia
- 33
- Pobrania
- 568
- Wydruki
- 2
- Wyświetlenia
- 1865
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
For an "indoor apartment Mini-Golf Tournament" we are having, I built some Mini-Golf-Putters!
In combination with this golf ball: http://www.thingiverse.com/thing:6025
and some homemade obstacles it should be LOADS of fun!!!
As winter is slowly approaching.... (in middle Europe at least ;-) ) I thought I'd share it with you, in case you get snowed in and bored!
Instructions
Print one MINIgolf_PUTTER.stl (I used the 0.3 layer resolution, 3 shells and 20% infill on a Makerbot Replicator 2) and it seems solid enough! Took exactly 1h to print.
Additionally you would need some wood or metal-rods. I used a 300mm long and 20mm in diameter round wood-rod as a handle (with a 10mm diameter hole drilled into one side and added a 650mm long and 10mm in diameter one with some wood glue.
To fix the 3D-printed part in place also add some glue or screw it from the outside!
I wrapped the handle with some black duct-tape (just for comfort)
The endresult should be an ~93cm long Standard Mini-Golf-Stick...
Have fun playing!!!
The 3D-printed putter holds a diameter of 10mm, but I added a blender file, in case you want to adjust it, e.g. in case there were standard imperial diameters you want to use.