Nerf blowgun six shooter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Test for a alternative dartblow pipe
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 1066
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution
Update: 20-11-2021 Problem that the stucked darts, after entering the barrel! Drill the first 80-100 mm of the barrel to 14 mm and the darts have enough speed and guidance to enter the tube/barrel whitout problems!
Canged version from the original from Natetru and working on the idea of cassiope34 to use a 16 mm PVC tube. Use only new darts and no used darts from flywheel guns they are to much damaged
needed parts: shaft round 4 x 95 mm, 2 ball-baerings 9x4x4 mm. O-ring 12x3 mm. 8x PT-srews 3x15 mm (or M3) and 12 magnets round 4 x length between 6 to 8 mm
Tubes in magzine and the magnets must stay the same or under/beneath the surface. The
main tube must have a a long countersunk side to correct smal misallinement small amount of oil is used on both sides of the magazine.
The O-ring will be pushed against the magazin on the moment of pushing your mouth against the mouth piece to assure a seal to prevend air escaping
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Resolution:
.2 Quality
Infill:
Gyroid 50%
Filament: Prusament PETG Galaxy black
Notes:
Layers 5/5/5. Brim for printing the Cap. print on smooth PEI
Category: Toy & Game Accessories