Ventilator controler (temprature controlled)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
On/off switch for the main 12VDC cooling ventilator in the lower section of the Rostock max V3 and V3.2
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 116
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
On/off switch for the main 12VDC cooling ventilator in the lower section of the Rostock max V3 and V3.2 so after a long print job is done the loud ventilator will stop keeping all the sleep needed people awake (only the small cooling ventilator for the mainboard in the upper section will keep working)
I made this for the V3 (large ventilator) but it look so nice behind the transparant grey cover that I also placed it in my V3.2
For the assembling I guess there is no explanation needed. The digital controller can be bought all over for a 3,00 - 4,00 Euro just surch for " W1209 controler"
You need four pieces of rings and bolts. Attachment with double sided tape
Print Settings
Printer Brand:
SeeMeCNC
Printer:
Rafts:
No
Supports:
No
Resolution:
0,2 mm
Infill:
25-50%
Notes:
Printed in PLA but that doesn't matter (you don't see it after the cover is placed)
Category: 3D Printer Accessories