Print in Place Balisong
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a print in place balisong. I've included a version with and without supports, if you want to add your own. It…
- Ocena
- 4,167 / 5
- Polubienia
- 113
- Pobrania
- 1205
- Wydruki
- 5
- Wyświetlenia
- 4406
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
This is a print in place balisong. I've included a version with and without supports, if you want to add your own. It is also a good reference to know what is a support and what isn't.
Make sure your printer is good with overhangs, this might be testing the limits of your printer.
So far, I've printed with a Monoprice Mini V2 at 0.35mm layer height (yellow) and and Ultimaker S5 at 0.15 layer height (red), with reasonable success. The overhang parts got a little droopy, but a little sanding should fix that.
Print Settings
Printer Brand:
UltiMaker
Printer:
Ultimaker S5
Rafts:
Doesn't Matter
Supports:
No
Notes:
Finer layer height should look better and make the overhangs more reliable.
Make sure printer cooling is on.
Post-Printing
After its printed, just snip off the supports. You might need to sand down the round parts of the handles so that they don't get caught on each other.
Category: Mechanical Toys