1 / 1
Christmas stockings / boot charm for i3 MK3S (MMU2S) — zdjęcie 1

Christmas stockings / boot charm for i3 MK3S (MMU2S)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Your printer needs some Christmas cheer!

Ocena
0 / 5
Polubienia
10
Pobrania
58
Wydruki
0
Wyświetlenia
249
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Your printer needs some Christmas cheer!

You can split the STL to parts to select an extruder for each section of the boot and accent lines.

The buckle part is raised. I wish I had made the cuff raised as well.

Be careful that your extruder isn't hitting the charms above Z 200 when printing tall objects.

This was inspired by CMI3D's work for cute little coloured booties, but I wanted something that would work as a MMU print. This model was drawn by me however.

Mine was printed using:

  • Prusament Galaxy Black
  • Prusament Lipstick Red
  • filaments.ca EconoFil White
  • filaments.ca Standard PLA Yellow Gold

Print instructions

Prints ok flat clip side down with supports under the whole thing. A little annoying but it works.

Tagi