T12 Soldering Station Enclosure for Makita 18v Battery
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Low-cost but high-performance portable wireless soldering station powered by Makita 18-volt battery.
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 125
- Wydruki
- 1
- Wyświetlenia
- 1290
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Low-cost but high-performance portable wireless soldering station powered by Makita 18-volt battery. This soldering station uses a clone Hakko T12 controller, which is extremely good for the price. It can heat up to 320 degrees within 30 seconds. The system is compatible with T12 series soldering tips, which have a wide range of tips you can choose to match your application.
With a built-in step-down power supply, it can use as a mobile dc power supply. The output voltage from the battery is adjustable from 0 to 20 volts. The PSU display can show real-time voltage and current and also has an input voltage reading option to check the battery status.
Makita Battery Mount for Makita Terminal (644808-8): https://www.thingiverse.com/thing:5674554
The original battery mount is designed by bitsplusatoms: https://www.thingiverse.com/thing:3875426
PROJECT LINK & WIRING DIAGRAM:
https://simplymaker.net/3d-printing/portable-2-in-1-makita-18v-soldering-station/
BUILD VIDEO:
COMPONENTS FOR THIS PROJECT
- DIY T12 Soldering Station Kits:
- 5A Step-Down Power Supply:
- Makita Battery Terminal (644808-8):
- KCD1-101 Rocker Switch (X2):
- Makita Compatible Terminal (Alternative):
- Extra T12 Soldering Iron Tips (Optional):
Helpful link for soldering tip selection: https://www.hakko.com/english/products/hakko_fm2027_2028_tips.html#t12
TOOLS, ELECTRONIC SUPPLY, AND FASTENING
- Crimping Tool:
- Spade Connector:
- JST-XH 2.54 3P Male Connector:
- 18 AWG wires (Red and Black):
- M6 x 10mm Socket Head Screws (X4):
- M3 x 5mm Button Head Screws (X4):
- M2.5 x 5mm Flat Head Screws (X4):
- M2 x 5mm Flat Head Screws (X4):
FILAMENT USE IN THIS PROJECT
SUBSCRIBE TO THE CHANNEL: http://shorturl.at/gikA4
FACEBOOK: https://www.facebook.com/simplymakerth
INSTAGRAM: https://www.instagram.com/simplymakerth
WEBSITE: https://www.simplymaker.net
Category: Tools