Telescope eye piece organizer tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple tray to hold telescope eye pieces. This tray will accept a mix of 2 inch and 1.25 inch pieces as it is.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 539
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Share Alike
Simple tray to hold telescope eye pieces. This tray will accept a mix of 2 inch and 1.25 inch pieces as it is.
It's fairly easy to adapt the script to create different dimensions and mixes of sizes. Near the top, the included openscad script has a declaration of the following format:
grid = [
[big, big, big],
[small, small, small, small],
[small, small, big]
];
Print instructions
Print Settings
The holes have been defined to be bigger than they strictly need to be. This allows for the fact that holes often come out smaller in the actual print. There is a parameter called "play" that can be tweaked to change the amount of play.
A tester object is included to test the hole sizes on a printer. This tester should print fairly quickly, so you can print this to verify that the holes are big enough