SD Card Display Bezel for Bambu Lab P1P with Vision enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A self-created model based on the designs of the two "remixed" models, which is compatible with the P1P Vision enclosure
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 190
- Wydruki
- 2
- Wyświetlenia
- 2026
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I was using the Bambu Lab P1P Screen Faceplate Frame, which I like for the minimalistic design. While I'm using the Bambu Lab P1P and playing around with the timelapse function after Bambu Lab sent the camera and LED light for free, I learned to hate the handling of the micro SD card on the P1P. So I looked for a solution and found the Bambu Lab P1P – SD Card Display Bezel (holds microSD to SD card converter). This is also converting the micro SD card slot to a standard size SD card slot. Beautiful! I have enough standard size SD cards flying around here. So I ordered the “CY 10cm Soft Flat Micro SD TF Memory Card Kit Male to SD Female Extending FPC Cable”, mentioned in the model description. But the model itself is not compatible with the P1P Vision enclosure (too long for the top cover plate). So I decided to design an new one by myself by combining the ideas of both models.
I've printed it in PETG, face down without support on a textured PEI plate. The walls are printed in fuzzy skin with 0.05 mm for bothe “Fuzzy skin point distances” and “Fuzzy skin thickness”.
The circuit board at the front of the SD card adapter was shortened by 1 mm with a file and fixed to the model with hot glue.