Avengers Logo with hexagon grid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
15cm Avengers Logo with hexagon grid. Printed in 3 Parts. There's a 0.2mm gap between the inserts and the outer frame,…
- Ocena
- 5 / 5
- Polubienia
- 65
- Pobrania
- 322
- Wydruki
- 6
- Wyświetlenia
- 1001
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Share Alike
15cm Avengers Logo with hexagon grid.
Printed in 3 Parts. There's a 0.2mm gap between the inserts and the outer frame, so it fits very well by me. Check first by printing, or if you scaled up or down the logo, the small piece, if it fits in the base, otherwise you can play with the "horizontal expansion" in Cura.
As alternative you can print "Avengers_Single-Piece-for-filament-change.stl" as a single file and change the filament at Z or, do a paint job. ;)
Little misstake:
please use Small-Piece_V2 and A-Circle_V2, fits better.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0,2
Infill:
20
Filament: anything PLA silver and red
Category: Signs & Logos