1 / 2
Neptune 3 Pro Bed Harness Support
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For silicone bed spacers.
- Ocena
- 0 / 5
- Polubienia
- 48
- Pobrania
- 187
- Wydruki
- 0
- Wyświetlenia
- 2016
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 3)Remiksy (2)Kolekcje (54)Powiązane
Just a fairly accurate recreation of the factory support but made for silicone spacers and without the annoying cross piece that needs to be cut to remove. 1.5mm thick floor, 18mm diameter hole for the spacer. I use klipper and set the left rear where the support is as the reference. Considering reducing floor to 1mm and increasing diameter of hole. Feedback welcome.
