High precission plotter attachment for Prusa MINI
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A system to mount any pen you wish to the Prusa MINI.
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 76
- Wydruki
- 1
- Wyświetlenia
- 1197
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I have modified the movement system from itsaMeWolf's design with a higher focus on eliminating play between parts. The dove tail is now designed to be printed in the horizontal plane and should made with ironing enabled (see 3mf and gcode files). Additionally the pen location is moved closer to the nozzle to increase usable plotting area.
What you need
4x M3 8mm bolts
2x washers for the interface layer between the heatsink (or you could print them files are also included)
Rubber band (you have two options for its positioning either on the grove in the model or the top of the pen) In general just make sure minimal force is applied.
Setting up
I suggest following the instructions present in this model's description
https://www.printables.com/model/252731-prusa-mini-pen-plotter
Warnings
DO NOT PRINT WITH THE ATTACHMENT ON (I intentionally printed mine in red so I don't forget)
REMOVE PEN HOLDER PART WHEN HOMING (you can keep the mount part on)