Shockproof LoRa board mounts for PVC pipes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shockproof LoRa board mounts for Meshtastic nodes, using TPU printed models and PVC pipe parts.
- Ocena
- 0 / 5
- Polubienia
- 56
- Pobrania
- 197
- Wydruki
- 0
- Wyświetlenia
- 3471
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Shockproof LoRa board mounts for Meshtastic nodes, using TPU printed models and PVC pipe parts.
Choose the appropriate models for your LoRa board, print them in TPU and mount inside 2" or 2.5" (US) PVC pipe parts as needed.
T-Beam NEO-6M boards can use a 2"-to-1.5" PVC tee part to support the SMA antenna connection, otherwise use a straight PVC pipe for the NEO-M8N with ipex/UFL antenna connection allowing antenna to be mounted wherever you need it.
The gasket part can be used to help seal the PVC end caps, if PVC cement isn't used to seal the pipes (recommended). Use some waterproof USB connection to connect to a solar panel (to charge the battery) or an external power source.