OnePlus 10 Pro Phoneholder with 40mm clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Phoneholder with 40mm clamp for OnePlus 10 Pro phone
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 555
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This model is designed to mount the OnePlus 10 Pro phone on a vertical board with a thickness of 40mm. It is ideal for mounting on a bed. There is a small clip on the side for the OnePlus USB-C cable.
The 3MF file was created using OrcaSlicer and saved with the appropriate parameters for the BambuLab X1C. The profile includes the use of three filaments. The colors black and red are required. Additionally, the "Support W" filament was used as a separation layer for supports to achieve smoother surfaces, but it is not mandatory and can be removed.