1 / 1
Prusa MK3s+ Fan shroud adapted for Mk3s — zdjęcie 1

Prusa MK3s+ Fan shroud adapted for Mk3s

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

0,60 € – 0,73 € netto (bez VAT)

Dla pliku: MK3s+ fan duct / fan_shroud_mk3s_adapted_mk3s_02mm_abs_mk3s_48m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,67 € netto (środek widełek).

Masa podana przez autora
4 g
Czas druku podany przez autora
48 min
Materiał u źródła
ABS
Materiał wyceny
ABS
Drukarka wyceny
Bambu Lab X1 Carbon - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Prusa released the printable parts for MK3s+ and the fan shroud is much better than the stock one of the Mk3s, so, for…

Ocena
4,883 / 5
Polubienia
294
Pobrania
6778
Wydruki
39
Wyświetlenia
26 544
Oceny
60

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Prusa released the printable parts for MK3s+ and the fan shroud is much better than the stock one of the Mk3s, so, for everyone who don't want to fully upgrade from Mk3s to Mk3s+ but still would like better cooling, I cut the second mounting point on the Mk3s+ fan shroud in order to make the assembly possible on a Mk3s printer :).

In order to use this you also need to download and print the Mk3s+ print fan support (print-fan-support.stl) that you can download here https://www.prusa3d.com/prusa-i3-printable-parts/ (Original Prusa i3 MK3/MK3S MK3S+ upgrade)

Print instructions

Print with ASA/ABS, 0.2mm layer height and remove included support after printing

Tagi