Makerbot Replicator 2X Carriage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I modified a Makerbot Replicator 2 carriage for the 2X: https://grabcad.com/library/makerbot-replicator-carriage-1
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 484
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
A replacement carriage for the Makerbot Replicator 2X.
The Onshape document I used to create this is here:
https://cad.onshape.com/documents/0af56934a5721f526ae04cc7/w/0e5af0da36d42aac23f363d6/e/c35e8f41962a5b604971d107?renderMode=0&uiState=6467d931169d2c586860125d
I remixed this design:
https://grabcad.com/library/makerbot-replicator-carriage-1
The included breakaway supports should be sufficient to print the carriage. Avoid adding any slicer supports, they shouldn't be necessary.
Requires two M3 screws and nuts for the belt clamps.
Avoid any warping when printing - this will make it difficult to fit onto the linear bearings of the Replicator. Printing in ASA with an enclosure and moderate speeds worked well for me, but fast printing with CF nylon made parts that did not fit onto the printer.
Belt clamps should be printed with the teeth facing up. The teeth should mesh with GT2 pulley.