Neckerchief / Slide / Pasa Pañuelo / Canuto Grupo Scout - Guias "San Pablo"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of "boy scouts neckerchief slide" by rheaghen and "Wolf Cub Scout Neckerchief Slide" by singharmony', with a few…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 121
- Wydruki
- 1
- Wyświetlenia
- 853
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix of "boy scouts neckerchief slide" by rheaghen and "Wolf Cub Scout Neckerchief Slide" by singharmony', with a few changes:
- As we are a mixed Scout/guides community I wanted to add community's logo on one side, keeping the fleur de Liz on the other
- While I work with the Cub's, I wanted to my slide to show my role (Kotick the white seal),
- I also wanted be able to print several slides an add the front at a later time, (printed with different material)
- so I made the front customizable for easy replacement / update.
- a pass-through hole allows to change the front and secure it with a screw (if necessary).
- I’m including a simple blank front with a screw holder to be customized as needed.
I used 3d builder (included in windows 10) and printed with Black PLA in .02
Una recreación basada en "boy scouts neckerchief slide" por rheaghen y "Wolf Cub Scout Neckerchief Slide" por singharmony', con algunos cambios:
- Como soy parte de una comunidad Mixta Scout Guías (Grupo San Pablo) y quería incluir el logo de nuestra comunidad en un lado del pasa pañuelo y dejar la fleur de Liz del otro lado
- Si bien trabajo en manada, quería que mi canuto mostrara mi rol en la misma (Kotick la Foca Blanca),
- También quería poder imprimir pasa pañuelos y después darles la personalidad sin tener que rediseñar todo para cambiar el frente, e incluso poder imprimir el frente en otro material.
- Decidí hacer el frente una pieza aparte de la pasa pañuelo facilitando la personalización del mismo
- Le agregué un orificio pasante para poder asegurar el frente con un tornillo (de ser necesario).
- incluyo un frente en blanco para el que quiera customizarlo, tiene un encastre que se asegura al pasa pañuelo y acepta un tornillo para más seguridad.
Use 3d builder (incluido en Windows 10) para el diseño y lo imprimí el PLA Negro de Printalot en .02
Print Settings
Printer:
Makerparts MKv2
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.02
Infill:
50
Filament:
Printalot PLABlack
Notes:
1 mm walls
Category: Accessories