1 / 2
Shelly RGBW2 Box, coxial power supply + M3 bolts
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Power your Shelly RGBW2 + LEDs with a DC coxial power supply and close it with M3 nuts and bolts
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 90
- Wydruki
- 0
- Wyświetlenia
- 776
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (22)Powiązane
This is a remix of RGBW2 Box with a DC coxial power supply adapter and M3 nuts and bolts. In my print there was no need to glue the nuts into the box, the lid holds tight.
Printed with PLA (not perfect for the clips, see original model), 0.3mm.