Beer Stubby Holder (Vase Mode)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A stylish stubby holder that's snug fit for a Coopers stubby (375ml bottle) and can be resized for other bottles/cans.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 95
- Wydruki
- 1
- Wyświetlenia
- 426
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Share Alike
A stylish beer stubby holder for printing in vase mode (single wall without a seam) that keeps your beer cold and prevents a lot of condensation forming on the bottle in humid environments (perfect for the tropics). It's sized for a perfect fit for a 375ml Coopers stubby (a fairly common size across a few beers) but can be resized in your slicer to fit other widths/heights of bottles or cans.
I recommend a 0.6mm or larger nozzle and enough base layers to provide around 2mm of thickness on the base.
Any filament will work, but if you're going to keep these in your car in a hot climate then you'll need to use a filament that can take the heat (maybe ASA, PET-CF, PC etc).
The photos are of a print using a cheap Silk PLA from a 0.6mm nozzle at a layer height of 0.36mm with 6 bottom layers, printed on a Bambu Lab X1C with the generic Silk PLA profile.
You must enable VASE MODE for this to print properly.
Drink responsibly (and stylishly)!