1 / 2
Ender 3 Pro Meanwell PSU 40mm v-slot bracket
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bracket to freely mount the Ender 3 Pro's Meanwell LSR350 PSU to a 40mm v-slot beam.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 37
- Wydruki
- 1
- Wyświetlenia
- 414
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A bracket to mount the Meanwell LSR350 PSU upright to a 40mm twin v-slot beam. I made it to mount my Ender 3 Pro's PSU away from the vertical beam and make space for a second Z-axis lead screw. Two screws with t-nuts can be used to fix it in place.
Check out the image in this comment for how to orient the part on the buildplate.
Needed a light sanding where the rails start and end to get a perfect fit, otherwise it was a bit tight.