Bulbasaur Tree (Organic Supports)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use a special kind of tree for Bulbasaur
- Ocena
- 0 / 5
- Polubienia
- 105
- Pobrania
- 90
- Wydruki
- 0
- Wyświetlenia
- 1499
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Plant a tree in your Bulbasaur planter. Just glue the tree to the planter (but it still holds without glue - don't move it too much then).
You can find the planter here: https://www.printables.com/de/model/106085-cute-pokemon-bulbasaur-bisasam-planter The tree has the correct size if you have printed the planter at 100%.
The cylinder helps with the orientation of the tree afterwards. I do feel like that the tree has a “Schokoladenseite” but try to translate that one into English… good luck ;)
Settings I used:
Layers and perimeters
Perimeters: 1
Solid layers (Top/Bottom): 0
Infill
Fill density: 5%
Fill pattern: Rectilinear
Support material
First layer density: 100%
First layer expansion: 20mm
Style: Organic
Advanced (Extrusion width)
Support material: make it thicker (I set it to 0.45mm)
Optional: You can play with the tree support angles and diameters in the slicer to get an individual look
More information:
