1 / 4
Bergamont Pelago - Front bracket
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stock bracket don't fit well, this does. And makes it as low and tight as possible.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 193
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Made for Bergamont Grandurance bicycle with Pelago Commuter Front Rack
(I also have the optional lowrider pannier support)
Stock bracket don't fit well. This makes it fit good as low and tight as possible.
Since it flexes a little the additional fork supports are recommended:
https://www.printables.com/model/486359
Also check out my other designs for this rack, see picture.
Print instructions:
Support inside, included 3MF have painted support where necessary
Print with PETG 80% infill.