Legend of Zelda: Skyward Sword - Small Key
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The most accurate model of it that you'll find.
- Ocena
- 0 / 5
- Polubienia
- 58
- Pobrania
- 192
- Wydruki
- 1
- Wyświetlenia
- 838
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The most accurate model of it that you'll find.
It is not perfect by any means, nor can it be, but until someone finally rips the model from the game I think this is the closest you'll find.
Update 2020-12-14: Added variant of the shaft and teeth where the teeth are recessed/slotted into the shaft. Removes need of guide blocks and gives the teeth a flat bottom for better print orientation but likely at the cost of a bigger gap to fill after assembly.
Print instructions
While available as a single piece I'd recommend printing it using the split parts for ease of printing and overall print quality, at least for FFF printers.
Had .2 layer height and .4 nozzle in mind when deciding numbers.
I suggest excessive infill (50+ %) to add more heft, improving feel when handling the completed thing. Makes it feel more real.
Guide blocks are for more easily centering the teeth when affixing them.