1 / 4
Splendor Board Game Chip and Card Holders
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple chip and card holder for Splendor. Open source, CAD files available
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 203
- Wydruki
- 0
- Wyświetlenia
- 1224
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (1)Kolekcje (57)Powiązane
This is a card and chip holder for the board game Splendor
Print time:
- 2 build plates
- ~200 grams of filament
- ~5 hours on BambuLab X1
BOM:
- No additional hardware required
Materials:
- Any material
- I used PolyTerra Draft PLA. Something stiffer would be nice
Print Settings:
- Defaults should be fine
Assembly
- None required
Change log
- 2023-05-20
- Initial release
Feedback and remixes:
- Post your feedback or link a remix in the comments and I’ll incorporate it on a ~monthly cadence
Credits:
- None