Humidity/Temperature gauge holder for Bambu Lab X1C/P1P
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A surround to hold a cheap humidity/temperature gauge.
- Ocena
- 5 / 5
- Polubienia
- 51
- Pobrania
- 308
- Wydruki
- 8
- Wyświetlenia
- 1413
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
There are a few humidity/temperature gauge holders on Printables but I found they were difficult to see, being either obscured by the heat bed, or by the extruder when printing.
I made this one which is easy to see from the front door and from the Handy App. As a bonus, it also doubles as a cover for the 4 holes at the back of the machine between the stepper motors.
The model only needs a couple of supports for the pins and prints in ~15 min @ 0.20mm.
I printed in ABS but should be ok in PLA+ or PETG.
Uses a commonly available gauge from Amazon/Aliexpress. Search for “mini hygrometer temperature gauge”.
Enjoy :)