1 / 6
Organic plant pot — zdjęcie 1
1 / 6

Organic plant pot

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Plant pot with organic support

Ocena
5 / 5
Polubienia
182
Pobrania
340
Wydruki
1
Wyświetlenia
2673
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Instruction

After load stl turn on “Support on build plate only” and choose organic support then you have to use “Paint-on supports” option in Prusa Slicer. To make nice looking support you have to make a lot of little dots on the pot like on picture below.

 

and it should look like this

You can experiment with suppor painting and make it like you want of course.

If you don't want  leaks use 100% infill.

Under pot there is little tank for water. If you want use it you have to drill hole in bottom of the pot. You can put there cotton string so leaked water can go up. 

 

 

 

 

Tagi