Mini Forklift
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mini (almost) print in place forklift,
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 204
- Wydruki
- 0
- Wyświetlenia
- 786
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
This is a mini print in place forklift, I've been through a few designs before coming up with this final one.
The “fork” is printed separately and just needs to be slid onto the mounting poles,
Also a little box for the forklift to pick up is included, however this needs to be printed at 0% infill to be light enough that the forklift doesn't fall over - I also lowered the amount of top/bottom layers to 2. I might design some more things to pick up if so I'll add them to the files.
The main forklift is printed at 50% infill, however if time is not an issue making this 100% will make it be able to pick up heaver objects without falling over.
Finally this can be a bit tricky to print well given the thin areas and the roof which involves a lot of bridging so good luck!