1 / 2
BentoBox V2.0 fan duct - remix for CNCKitchen M3 brass inserts
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the original BentoBox V2.0 fan duct to fit M3 brass inserts by CNCKitchen
- Ocena
- 4,333 / 5
- Polubienia
- 15
- Pobrania
- 94
- Wydruki
- 2
- Wyświetlenia
- 1695
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 7)Remiksy (1)Kolekcje (30)Powiązane
The original model is designed for the use of brass inserts M3xOD5mmxL3/4mm, the original holes have a diameter of 4.6mm with a depth of 4mm.
This remix has adjusted holes which fit the frequently used M3 brass inserts sold by CNCKitchen.
The diameter of the holes is 4.2mm and the depth is 6.7mm. I have successfully tested these dimensions with testprints on on several different machines. If you think an additional different diameter is required, please contact me. :-)