Hitachi TRK-510ER transport button
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Transport (Play/FF/RW/REC/Pause/Stop) button for the Hitachi TRK-510E(R) radio cassette player. Modelled in FreeCAD.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 147
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I acquired an Hitachi TRK-510ER radio cassette player that was missing its Play button. It was non-function in other ways, so when it came apart I removed the buttons and modelled one in FreeCAD. Aside from the front/rear chamfers, I think it's a good match for the original.
This prints upright with the small end on the plate. Depending on your adhesion, you might need a brim, and you will need support for the small protrusion on the side which acts as a retainer when fitted. I've used 25% cubic infill and 2mm-worth of base layers, as the button acts on quite a stiff, thin blade.
In the cover photo, the two buttons nearest the camera are the printed version - the others are the originals.