Satsuma 180 v1.0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
CoreXY machine that uses some parts from a Prusa mini including the bed assembly.
- Ocena
- 5 / 5
- Polubienia
- 1076
- Pobrania
- 2024
- Wydruki
- 2
- Wyświetlenia
- 31 380
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Project is no longer under active development or maintenance by me. Feel free to remix or reuse.
Welcome to project Satsuma : )
This project uses SOME of the Prusa mini + additional components to make a CoreXY Printer. Keeping with the design decisions of the Prusa mini I have used square nuts M3, M5 instead of heat-set inserts, making assembly a breeze.
(DO NOT DESTROY YOUR WORKING PRUSA MINI TO MAKE THIS PRINTER Source the parts elsewhere)
Link to Discord
Satsuma 120 can be found here
CHANGELOG 171223:
Updated/Added
- Updates to X/Y Drive units, inner stepper motor screws can now be fully tightened before units are installed.
CHANGELOG 101223:
Updated/Added
- Final v1.0 Assembly
- Panels
- Toolhead wiring routing/gland
- PTFE coupling socket (ECAS04)
CHANGELOG 250723:
Updated/Added
- Direct Drive option using the Orbiter 2.0
- Bambu X1 Nozzle Assembly or Revo Micro Hotend mounting options
- Front idlers
- Panel Clips
- Internal Filament Spool Holder
CHANGELOG 260623:
Updated/Added
- Slotted holes on one side of the Z assembly to increase articulation
- X+Y Endstop limit switches
- IEC Socket mount
- PTFE Brace with cable routing
- Wago connector mounts inside Backpack
- Backpack Fan mounting options
- Extruder (currently Titan) mount
Having a Prusa mini for this build is not essential, all of the parts can be purchased easily.
Be aware the following BOM may have a few parts missing:
https://docs.google.com/spreadsheets/d/1j9XkWJjpuDxKR5D-tsqN0p6wRn4Gp6H0tIH2ABmrAIE/edit?usp=drivesdk
Huge thanks to @DavidMR_278394 for his time spent on the BOM
The project is currently untested feel free to help make this printer fully functional, I look forward to seeing your changes.
THINGS TO BE AWARE OF:
- Non PM+ parts needed
- Drilling and tapping (frame)
- Limited bed tilt
- Z Motor feed splitter (stock mini mainboard)
- New firmware configuration
- Lead screw nut block modelled to accept TR8x2/T8x4 Nut smaller type than mini. Mini type coming soon.
Things I have tested with success:
- All printed parts
- X motion system
- Y motion system
- Belt paths
- Belt tensioners
- Toolhead belt clamps
- Frame
Frame extrusion lengths:
Blind hole location:
Potential Direct Drive Option: